Standard Features
  • Rack and pinion drive
  • Dynamic motor braking and self-locking gearbox
  • 2″ (51 mm) rigid double square tube rail construction
  • Inside and outside radius curve capabilities
  • Spiral and flat landing configurations
  • Support posts anchored to stair treads (no wall required)
  • 300 lb (136 kg) capacity
  • Almond beige seat and rail
  • Battery-powered 24 vdc motor
  • Pair of 12-volt, maintenance-free batteries
  • Charger to be plugged in at top or bottom landing 110 vac, 15 amp, 60 hz outlet
  • Electronic controller with soft start
  • Fused control circuit
  • Wireless call-send controls at both landings
  • Continuous pressure buttons
  • No rail overhang at top landing
  • Foldable footrest, seat and padded armrests
  • Seat that swivels and locks in 60º and 90º positions both directions
  • Seatbelt
  • Seat swivel safety switch
  • Obstacle sensor
Dimensions
Dimensions inches mm
A Floor to top of footrest 8 203
B Top of footrest to top of seat 17 432
C Seat height from floor 25 635
D Top of seat to top of armrest 8.5 216
E Width between armrests(1) 18 457
F Width outside armrests 25 635
G Distance required at bottom of stairs(2) 24 610
H Overall height 37 940
I Back of carriage to wall 2.5 64
J Backrest to wall 5.5 140
K Front of carriage to wall 17 432
L Front of seat to wall 22.5 572
M Front of arms to wall 19 483
N Overall width footrest down 29.5 750
O Width when folded 20 508
P Front of top rail to wall 6.5 165
Q Front of bottom rail to wall 7.5 191
R Typical distance between support posts 24 610
S Rail overhang at top landing 0 (min overhang)

(1) 21″ (533 mm) optional armrest width available
(2) Dependant on stairway angle

Drawings