Standard Features
- 750 lbs capacity
- Maximum travel of 23′ *
- Travel speed: 25 feet/min (0.13 m/s) approx.
- 34″ x 54″ minimum platform dimensions
- 115 VAC operation (115 VAC up direction and 12 VDC battery down)
- Emergency battery lowering
- Remote location emergency manual lowering valve
- 2:1 chain hydraulic drive system
- Gear type hydraulic pump
- 8 foot long modular guide rail assembly
- Roller guide shoes
- 1.5 hp (1,119kW) output
- Electronic free relay logic controller
- Automatic baterry recharching system (115 VAC)
- Combination mechanical lock and electric contacts or electric strike*
- Low voltage controls
- Normal limit switch
- Control buttons on platform*
- Keyed call station
- Continuous pressure directional buttons
- 42″ (1,067 mm) high side guard panels
- Non-skid platform surface
- Beige acrylic urethane paint on all steel surfaces
- No machine room required
* Consult local codes and regulation
Optional Equipment
- Special platform dimensions up to 18 ft2*
- Enter/exit same side
- 90� exit
- Intermediate stops
- Platform gate
- Top landing gate
- Upper/lower landing door 80″
- Flush mounted 80″ (2,032 mm) door and frame, 1H1/2 ULC fire-rated
- Portable unit package
- Stair bridge
- Flip up seat
- Custom color
- Public building package conforms to CSA-B355 and ASME A18.1*
- Emergency light and alarm
- Direct hydraulic drive system
- Outdoor package including electro-deposited yellow zinc coating
- Motorized door
Models Available
| V1504-STD | The standard model is built around a powerful hydraulic system which can raise a platform and the users throughout various architectural boundaries. It is designed to fit indoor hoistway applications and also for outdoor use. |
| V1504-TL | The tall enclosure model is designed to provide an enclosure with metal inserts from the bottom landing door to the top landing gate. It is a good alternative to a three gate system because of it’s simplicity and ease of operation. |
| V1504-PE V1504-ALPE |
The plexiglass enclosure model is designed to provide an aesthetic enclosure with plexiglass inserts. It is available with various travels and is offered with top landing gate for semi-enclosed hoistway or with top landing door, enclosure extension and plexiglass dome for both indoor and outdoor applications. The ALPE model is made of an aluminum enclosure and a yellow zinc treatment on steel parts to withstand the outdoor environment. |
| V1504-LUX | The luxury model has been created to meet those very personalized architectural needs. It is a rich blend of tempered glass, stainless steel or brass materials. It is designed with a bottom landing door and top landing gate or door. |
| V1504-MOB | The mobile model is a lift that can be rolled inside a building to any low rise barrier in order to become wheelchair accessible. It easily stores out of sight when not in use. |
* Consult local codes and regulation
Specifications
|
|
|